Ameritool-1750-16 Gas Spring

Ameritool-1750-16 Gas Spring
Click to enlarge

Ameritool 1750-16 Gas Spring
*End Fittings Not Included

MATERIALS & FINISHES EXTERNAL SURFACES:
SHAFT: Chrome Plated 316 Stainless Steel
CYLINDER: 316/316L Stainless Steel

Delivery: Average 2 Weeks (Maxum will email a tracking number when shipped). Each spring is custom made and charged in America.

Force Range: 200-1,200Lbs
*(enter force in box below in increments of 5 Lbs)

* Please read the Ameritool Bleed-Off Instructions located in the left side information box.

Made in America - 1 year factory warranty

Rod Dia (d): 0.875
Cylinder Dia (D): 1.750
Stroke (A): 16.0
Extended Length (L): 36.75
Compressed Length (CL): 20.75
Ball Dia: 5/8-11 Male Thread
Force: 200-1,200Lbs

Available Options:

Please be sure you have selected ALL the desired options below before putting the item in your cart. Price adjustments are listed for each option if appropriate.

Spring Force Amount:
Barrrel Side End Fitting:
Rod Side End Fitting:
Oil Type:
Barrel Finish:
Locking Mechanism/Guard Tube:

This product was added to our catalog on Wednesday 11 January, 2012.

Quantity1+10+ 50+ 
Price for each$443.75$442.00$438.75
Your savings- 0%1%

Quantity: 

Ameritool Products are subject to the Legal Terms and conditions as well as the Gas Spring Guidelines of Ameritool Mfg., Inc. Please see www.ameritoolmfg.com for these Terms and Guidelines. Extreme duty; tested range: -40‚°F to 300‚°F (-40‚°C to 148‚°C). Product length tolerance is ‚± .08 in. (2.0 mm). Tolerance is + 5% of the nominal force. Maximum piston speed is approximately 12 in. /sec. (.3 m/sec). Fast operation rates lead to excessive heat build-up resulting in internal seal damage. Gas springs are filled with oil and are under pressure. Please dispose of properly. Do not puncture or open. It is the responsibility of the customer to determine all required dimensions. Mount gas springs rod down. Provide physical stops to limit the spring¢‚¬„¢s extremes. Do not scratch, dent, chip, bend or paint the rod. Do not puncture or incinerate. User is responsible for determining whether the Maxum Hardware product is fit for a particular purpose and suitable for user¢‚¬„¢s application. Except where prohibited by law, Maxum Hardware and seller will not be liable for any loss or damage arising from the Maxum Hardware product, whether direct, indirect, special, incidental or consequential, regardless of the theory asserted, including warranty, contract, negligence or strict liability.

Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
0 items
Share Product
Share via E-Mail
Share on Facebook
We Accept