Ameritool-1165-20 Gas Spring

Ameritool-1165-20 Gas Spring
Click to enlarge

Ameritool 1165-20 Gas Spring
*End Fittings Not Included

SHAFT: Chrome Plated 316 Stainless Steel
CYLINDER: 316/316L Stainless Steel

Cross Reference: Compare to : 6626K78

Delivery: Average 2 Weeks (Maxum will email a tracking number when shipped). Each spring is custom made and charged in America.

Force Range: 75-500Lbs
*(enter force in box below in increments of 5 Lbs)

* Please read the Ameritool Bleed-Off Instructions located in the left side information box.

Guard Tube: Protects the rod from damage due to incidental impacts. This accessory adds .1 inches to the extended length of the gas spring.

Lock Tube: Mechanically locks the gas spring in the fully extended position.

** You can choose either the Guard Tube or the Lock Tube, but not both on the same gas spring.

Made in America - 1 year factory warranty

Weight:  5.00

Rod Dia (d): 0.562
Cylinder Dia (D): 1.165
Stroke (A): 20.0
Extended Length (L): 44.0
Compressed Length (CL): 24.0
End Detail: 10mm Male Thread
Force: 75-500Lbs

Available Options:

Please be sure you have selected ALL the desired options below before putting the item in your cart. Price adjustments are listed for each option if appropriate.

Spring Force Amount:
Barrel Side End Fitting:
Rod Side End Fitting:
Oil Type:
Barrel Finish:
Locking Mechanism/Guard Tube:

Price for each$275.87$260.55
Your savings- 6%


Estimated ship dates are currently scheduled out 3-4 weeks.

Ameritool Products are subject to the Legal Terms and conditions as well as the Gas Spring Guidelines of Ameritool Mfg., Inc. Please see for these Terms and Guidelines. Extreme duty; tested range: -40‚°F to 300‚°F (-40‚°C to 148‚°C). Product length tolerance is ‚± .08 in. (2.0 mm). Tolerance is + 5% of the nominal force. Maximum piston speed is approximately 12 in. /sec. (.3 m/sec). Fast operation rates lead to excessive heat build-up resulting in internal seal damage. Gas springs are filled with oil and are under pressure. Please dispose of properly. Do not puncture or open. It is the responsibility of the customer to determine all required dimensions. Mount gas springs rod down. Provide physical stops to limit the spring's extremes. Do not scratch, dent, chip, bend or paint the rod. Do not puncture or incinerate. User is responsible for determining whether the Maxum Hardware product is fit for a particular purpose and suitable for user's application. Except where prohibited by law, Maxum Hardware and seller will not be liable for any loss or damage arising from the Maxum Hardware product, whether direct, indirect, special, incidental or consequential, regardless of the theory asserted, including warranty, contract, negligence or strict liability.

Quick Find
Use keywords to find the product you are looking for.
Advanced Search
0 items
Share Product
Share via E-Mail
Share on Facebook
We Accept